# smartctl -d scsi -H /dev/sda
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-358.6.2.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
SMART Health Status: OK
# smartctl -d scsi --all /dev/sda
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-358.6.2.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
Vendor: SEAGATE
Product: ST914603SSUN146G
Revision: 0B70
User Capacity: 146.810.536.448 bytes [146 GB]
Logical block size: 512 bytes
Logical Unit id: 0xzzzzzzzzzzzzzzzz
Serial number: xxxxxxxxxxxx xxxxxxxx
Device type: disk
Transport protocol: SAS
Local Time is: Tue Jun 25 15:55:41 2013 ART
Device supports SMART and is Enabled
Temperature Warning Enabled
SMART Health Status: OK
Current Drive Temperature: 28 C
Drive Trip Temperature: 68 C
Manufactured in week 14 of year 2011
Specified cycle count over device lifetime: 10000
Accumulated start-stop cycles: 36
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 3525719670
Blocks received from initiator = 2628710377
Blocks read from cache and sent to initiator = 948581501
Number of read and write commands whose size <= segment size = 333091422
Number of read and write commands whose size > segment size = 6
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 10638,62
number of minutes until next internal SMART test = 58
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 757040161 0 0 757040161 757040161 17189,741 0
write: 0 0 0 0 0 3592,824 0
Non-medium error count: 18
No self-tests have been logged
Long (extended) Self Test duration: 3600 seconds [60,0 minutes]
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.